Spatial resolution in GNSS-R under coherent scattering

© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Global Navigation Satellite Systems Reflectometry can be understood as a multistatic radar using satellite navigation signals as signals of opportunity. The scattered signals over sea ice, flooded areas, even under dense vegetation, and in some cases, over land show a significant coherent component. Under coherent scattering conditions, it is usually stated that the coherent signal component comes from an area equal to the first Fresnel zone. This letter analyzes in more detail the spatial resolution in this forward scattering configuration, showing that, when coherent scattering is nonnegligible, the spatial resolution is mostly determined by the geometry and not by typical surface roughness values. As the scattering area around the specular reflection point increases and encompasses the first Fresnel zone, the received power increases and then it fluctuates as higher order Fresnel zones are included (rapid phase changes due to the spherical waves). These contributions may explain in part the large scattering encountered over inhomogeneous land regions, as these different contributions add or subtract, depending on the phase of the electric field, and are weighted by different scattering coefficients (i.e., changes in the dielectric constant and/or surface roughness, such in water ponds or some agricultural fields). Finally, over homogeneous targets, when all Fresnel zones are included, the received power tends asymptotically to the value obtained using the free-space propagation with a total path length equal to the sum of the path lengths, weighted by the reflection coefficient. This value can also be interpreted as coming from an effective region that is actually ~0.6 times the first Fresnel zone.Peer ReviewedPostprint (author's final draft

Three-antenna two-dimensional imaging correlation radiometer: concept and preliminary results

Peer ReviewedPostprint (published version

Impact of rain, swell, and surface currents on the electromagnetic bias in GNSS-Reflectometry

The assessment of the electromagnetic (EM) bias is required to predict the performance of upcoming global navigation satellite systems-reflectometry (GNSS-R) altimetry systems, and its impact in data assimilation climate studies. In previous studies, the EM bias in bistatic GNSS-R altimetry (L-band) was numerically estimated for a wind-driven sea surface height spectrum, including the time-domain variability. In the present study, spectral models for the rain, swell, and surface currents are used to compute a perturbed wind-driven sea surface height spectrum, from which a perturbed three-dimensional (3-D) time-evolving wind-driven sea surface height is computed. The generated sea surface is then illuminated by a right hand circular polarization (RHCP) L-band EM wave, and the wave scattered from each facet is computed from each facet using the physical optics (PO) method under the Kirchhoff approximation (KA). Finally, the EM bias is computed numerically as the height of each patch times the forward-scattering coefficient, divided by the average of the forward-scattering coefficient. The impact of rain on the EM bias is a moderate decrease (in magnitude) due to the damping of the large gravity waves, which is more significant as the wind speed increases. The impact of swell is a small increase (in magnitude) mostly due to the change of the local incidence angles. The impact of currents can be either a moderate increase or decrease (in magnitude), depending on the sense of the current with respect to the wind, due to a change in the surface roughness.Peer ReviewedPostprint (author's final draft

UPC NanoSat-Lab - Past, present and future activities

The Universitat Politècnica de Catalunya UPC NanoSat Lab is part of the CommSensLab-UPC Specific Research Center of the Department of Signal Theory and Communications, and counts with the support of the School of Telecommunications Engineering (Telecom Barcelona, ETSETB). It is located in the UPC Campus Nord. The lab was originally created in 2007 to promote the testing of novel remote sensors and techniques in space, taking advantage of CubeSats. Over time, the lab has also started the study of Earth-to-space IoT and RF intersatellite link communications, as key enabling technologies for the next revolution of Earth Observation. At the time of writing this abstract, the UPC NanoSat Lab has developed and launched four CubeSats, and is working in three new missions that will be launched in Q4 2022 - Q1 2023. At present, the Lab is developing an "Open PocketQube Kit" for IEEE as a low-cost educational platform on space-related technologies. The lab has also a Class 8 clean room equipped with a shaker and thermal vacuum chamber, and Helmholtz coils, air bearing system, and Sun simulator for attitude determination and control system testing to conduct the environmental tests. Finally, in the MontSec Astronomical Observatory (OAdM),which is managed and operated by IEEC, hosts the UPCNanoSat Lab VHF/UHF and S-band ground station [3], where the data from the 3Cat-5/A satellite where downloaded. Since its inception in 2007, about 300 students have been trained in the lab, either as undergraduate students in the "Advanced Engineering Project" of the ETSETB, as Final Degree or Master Thesis projects, as graduate students, or just for an internship. This paper presents a quick overview of the past, present and future activities of the UPC NanoSat La

De la missió SMOS a la missió FSSCAT

En aquest Research Café es presenten projectes on la tecnologia es posa al servei dels mars i els oceans, i que estan lligats amb els objectius ODS Vida Submarina i Acció pel clima.Objectius de Desenvolupament Sostenible::13 - Acció per al ClimaObjectius de Desenvolupament Sostenible::14 - Vida Submarin

A model for the wind direction signature in the stokes smissin sector from the ocean surfaces at microwave frequencies

This paper presents a model of the Stokes emission vector from the ocean surface. The ocean surface is described as an ensemble of facets with Cox and Munk's (1954) Gram-Charlier slope distribution. The study discusses the impact of different up-wind and cross-wind rms slopes, skewness, peakedness, foam cover models and atmospheric effects on the azimuthal variation of the Stokes vector, as well as the limitations of the model. Simulation results compare favorably, both in mean value and azimuthal dependence, with SSM/I data at 53/spl deg/ incidence angle and with JPL's WINDRAD measurements at incidence angles from 30/spl deg/ to 65/spl deg/, and at wind speeds from 2.5 to 11 m/s.Peer ReviewedPostprint (published version

A review of RFI mitigation techniques in microwave radiometry

Radio frequency interference (RFI) is a well-known problem in microwave radiometry (MWR). Any undesired signal overlapping the MWR protected frequency bands introduces a bias in the measurements, which can corrupt the retrieved geophysical parameters. This paper presents a literature review of RFI detection and mitigation techniques for microwave radiometry from space. The reviewed techniques are divided between real aperture and aperture synthesis. A discussion and assessment of the application of RFI mitigation techniques is presented for each type of radiometer.Peer ReviewedPostprint (published version

Sensitivity of delay Doppler map in spaceborne GNSS-R to geophysical variables of the ocean

Global Navigation Satellite Systems reflectometry (GNSS-R) is a particular case of a multistatic radar in which the signals transmitted by navigation satellites are the signals of opportunity. These signals can be processed as a radar scatterometer, as a radar altimeter, or as an unfocused synthetic aperture radar. GNSS-R has shown its potential to infer numerous geophysical variables: over land soil moisture, vegetation height, detection of freeze-thaw state, etc., map sea ice extent and type…, and over the ocean wind speed and direction, significant wave height, altimetric measurements or even more recently NASA has released a marine plastics litter product, and some also claim that sea surface salinity (SSS) can be inferred. In addition, retrieval algorithms neglect some of the variations of the delay Doppler map (DDM) that are linked to the observation geometry, i.e., look angle with respect to the speed vectors of the transmitter and receiver. All these different effects impact the DDM peak value and its shape, and may affect the retrieval of geophysical parameters, and ultimately the data interpretation. In this study, the following factors impacting the DDM peak value are studied: the observation geometry, the sea surface temperature, and SSS, the 10 m height wind speed (U 10 ) and direction (WD), the presence of foam, the sea development state, the presence of swell, currents, rain, and the presence of oil slicks perturbing the sea surface roughness. This illustrates the complexity of the challenges presented when trying to retrieve some of these variables, the required corrections, and their accuracy.This work was supported in part by the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021-2023 (Spain) under Grant PID2021-126436OB-C21, in part by the European Social Fund, and in part by the GENESIS: GNSS Environmental and Societal Missions – Subproject UPC under Grant PID2021-126436OB-C21.Peer ReviewedPostprint (published version

Dual-beam interferometry for ocean surface current vector mapping

The recent use of along-track interferometry (ATI) in synthetic aperture radar (SAR) has shown promise for synoptic measurement of ocean surface currents. ATI-SARs have been used to estimate wave fields, currents, and current features. This paper describes and analyzes a dual-beam along-track interferometer to provide spatially resolved vector surface velocity estimates with a single pass of an aircraft. The design employs a pair of interferometer beams, one squinted forward and one squinted aft. Each interferometric phase is sensitive to the component of surface Doppler velocity in the direction of the beam. Therefore, a proper combination of these measurements provides a vector surface velocity estimate in one pass of the aircraft. The authors find that precise measurements dictate widely spaced beams and that the spatial resolution for the squinted SAR is essentially identical to the sidelooking case. Practical instrument design issues are discussed, and an airborne system currently in development is described. Through computer simulation, they observe the azimuthal displacement of interferometric phases by moving surfaces identical to those of conventional SAR and find that such displacement can bias the estimated surface velocity.Peer Reviewe

Impact of signal quantization on the performance of RFI mitigation algorithms

Radio Frequency Interference (RFI) is currently a major problem in Communications and Earth Observation, but it is even more dramatic in Microwave Radiometry because of the low power levels of the received signals. Its impact has been attested in several Earth Observation missions. On-board mitigation systems are becoming a requirement to detect and remove affected measurements, increasing thus radiometric accuracy and spatial coverage. However, RFI mitigation methods have not been tested yet in the context of some particular radiometer topologies, which rely on the use of coarsely quantized streams of data. In this study, the impact of quantization and sampling in the performance of several known RFI mitigation algorithms is studied under different conditions. It will be demonstrated that in the presence of clipping, quantization changes fundamentally the time-frequency properties of the contaminated signal, strongly impairing the performance of most mitigation methods. Important design considerations are derived from this analysis that must be taken into account when defining the architecture of future instruments. In particular, the use of Automatic Gain Control (AGC) systems is proposed, and its limitations are discussedPeer ReviewedPostprint (published version